Our NSF/ANSI Standard 50 certification, UL listing and patented non-halogen disinfection system allows you to proceed rapidly through your facility’s plan checking and permitting process. Regardless if your install is in a discreet home or the Taj Mahal, Float Lab® will assist you throughout the project from concept to completion.

Float Lab® Chambers come in an array of sizes, colors, and materials to meet all aesthetic requirements.

The minimum space required is 160 square feet for the chamber, equipment room, and shower/changing area.

For countries with 60Hz power, you will need a single designated 40 amp, 120-volt electrical feed per chamber.
For countries with 50Hz power, you will need a single designated 40 amp, 220-volt electrical feed per chamber.

Minimum 120 pounds per square foot.

Calculating the cost of Epsom salt, electricity, UV bulbs, quartz sleeves, replacement filters for the solution and air the total to provide each float is $0.97.

Sanitize before each use. Float Lab’s patented disinfection system is easily activated by pressing one button. Our system is certified to produce a minimum 3-log kill (99.9%) per cleaning cycle without the use of toxic halogen chemicals & is pre-calibrated to automatically shut-off when finished.

No. No bromine, chlorine, peroxide, ph up, ph down, shocking agents, foam away, buffer, clarifiers, flocculators or acids.

Through a 4 stage multi-cartridge filtration process finalizing at one micron.

Never. The system is certified to eliminate any and all (99.9 %) contaminates and microorganisms within 1 cleaning cycle.

The disinfection process lasts 10 minutes. Then there are an additional 10 minutes required for the ozone to off gas. These times are controlled by timing devices and indicated by safety lights.

Yes, we have a nine-stage air disinfection system finalizing at 1/3 of a micron producing 10 interior air exchanges per hour on the medium setting.  Compliant with ANSI/ASHRAE Standard 62.1-2007

Step-by-step maintenance training is provided complimentary to your staff prior to the completion of the project by a qualified Float Lab® technician.

Yes (third party)